Forum overview »
Hardware » Abit BX133-RAID, GeForce4 TI 4400 and HPT370 (1/1)
| Abit BX133-RAID, GeForce4 TI 4400 and HPT370 |
| Author |
Message |
Corinthian
Member
Posts: 87
Joined: 2000-03-05
Member No.: 2342
|
2002-04-09 10:02:29
Today I installed a Creative GeForce 4 TI 4400 video card on my Abit BX133-RAID motherboard.
I have been using a Gainward GeForce 2 MX with no problems.
When I turn on the PC with the new video card in place, I am no longer able to boot from the HPT370 controller.
In fact, the HPT370 boot screen does not display at all.
I am able to boot normally from the ATA33 IDE controller.
The HPT370 controller is not damaged in any way as far as I can tell, because if I put the old GeForce 2 MX in, everything is back to normal. Also, in Device Manager, no problems is reported on the HPT 370 controller when I am using the GeForce 4.
I have the latest bios for the motherboard.
Any advice ?
|
|
| Post #96147 |
|
sapiens74
Senior Member
Posts: 1915
Joined: 2000-03-29
Member No.: 2815
|
2002-04-09 10:20:18
remove all the extra pci devices and reset the bios. Let it reassign the IRQ's then add each device 1 at a time
|
|
| Post #96150 |
|
Corinthian
Member
Posts: 87
Joined: 2000-03-05
Member No.: 2342
|
2002-04-09 10:33:24
OK, will try that.
I'll let you know how it goes.
|
|
| Post #96152 |
|
Corinthian
Member
Posts: 87
Joined: 2000-03-05
Member No.: 2342
|
2002-04-09 12:52:47
Thank you, it works now 
|
|
| Post #96168 |
|
Forum overview »
Hardware » Abit BX133-RAID, GeForce4 TI 4400 and HPT370
| Legend |
View profile
Mark this post as solution (topic starter only)
Reply with quote to post
Edit post
Delete post (admin only)
|
|