Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Aeneon XTune DDR3 1600 2 x 1GB Review
Posted by Philipp Esselbach on: 05/27/2008 10:55 AM [ Print | 0 comment(s) ]
OCC has published a new review on the Aeneon XTune DDR3 1600 2 x 1GB
The Aeneon XTune DDR3 1600 2 x 1GB kit of desktop memory is not only a great looking kit of memory that you can proudly display in your rig, but the sticks are also able to perform very well. This kit of 2x1GB memory is able to operate at 1600MHz with only 1.5 volts being pushed through it. This is one of the advantages of DDR3 memory over DDR2 memory; the kits are able to perform at higher speeds with lower volts without sacrificing the timings that need to be set. The timings of this kit were, at stock, not very low to begin with, but not quite as high as I have seen in the past. When you begin to overclock the memory, you do need to loosen the timings beyond what I would like to set them at, though it does pay off with the higher clock speeds. The voltages that this kit of memory took, 1.5 volts, will help in reducing the overall temperatures inside of your case as the memory sticks are not heating up quite as warm as others.
Aeneon XTune DDR3 1600 2 x 1GB Review
