Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Dynatron DC1206BMY Copper Pentium4 Heatsink Review
Posted by philipp on: 04/22/2003 09:39 PM [ Print | 0 comment(s) ]
FrostyTech has posted a Dynatron DC1206BMY Copper Pentium4 Heatsink review
Dynatron heatsinks have made a good name for themselves since entering the mainstream market as relatively unknown competitors nearly two years ago. If you remember back to the summer of 2001 you might be interested to know that FrostyTech was the first to review a Dynatron heatsink, with the DC1206BML heatsink garnering a lot of interest for its then unique skived fins. The number of heatsinks using skived fin technology has ballooned since then, and now a days there are many different models to choose from. In this review we will be checking out the DC1206BMY heatsink which is designed to cool the Pentium 4 m478 platform. Skiving is a process by which the copper fins of the heatsink are drawn up to a height of 24mm from a flat plate of the material. The remains of that flat plate of copper go on to form the base of the actual heatsink which means the thermal properties should be very good. The significance of this set up is that there is no interface to be concerned with between the fins and base like solder, or thermal epoxy.