Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
I-Star Nitro AX Tower Case Review
Posted by Philipp Esselbach on: 01/20/2006 10:56 AM [ Print | 0 comment(s) ]
OCModShop has a review of I-Star's Nitro AX Tower Case
It strikes you when the case is first removed from the box: this is one
sleek tower with a hefty 5mm aluminum front plate decoration. This case
could easily mesh with audio equipment in the living room. If black
bores you, then try out this case in their red, yellow and blue
varieties of the Nitro AX.
There is room for five 3.5" hard disk drives, two 3.5" disk drives, and
a whopping five slots for larger 5.25" drives! The harddrive brackets
itself has rubber grommet inlay to minimize drive any vibration
transferred to the case, which reduces noise. These brackets are secured
on the bottom of the case with special screws.
sleek tower with a hefty 5mm aluminum front plate decoration. This case
could easily mesh with audio equipment in the living room. If black
bores you, then try out this case in their red, yellow and blue
varieties of the Nitro AX.
There is room for five 3.5" hard disk drives, two 3.5" disk drives, and
a whopping five slots for larger 5.25" drives! The harddrive brackets
itself has rubber grommet inlay to minimize drive any vibration
transferred to the case, which reduces noise. These brackets are secured
on the bottom of the case with special screws.
I-Star Nitro AX Tower Case Review
