Welcome to our website
To take full advantage of all features you need to login or register. Registration is completely free and takes only a few seconds.
Bytecc ME-350US USB2.0 HDD Enclosure Review
Posted by Philipp Esselbach on: 11/27/2003 03:55 PM [ Print | 0 comment(s) ]
PCStats has posted a Bytecc ME-350US USB2.0 HDD Enclosure review
The Bytecc ME-350US ships unassembled, and so it
take five or ten minutes to install the hard drive (which you must provide separately, no drives are included in the kit) from scratch. Installation is dead simple; the hard drive is connected up to the 80-pin IDE cable and molex power connector, and the entire assembly is slid into the one-piece aluminum chassis. With everything inside the unit all snug as a bug, a set of dovetailed covers slide into place on either side of the aluminum enclosure, and are capped off by a final back plate which is screwed into place as well. When it's all said and done, the Bytecc ME-350U2 locks the hard drive behind at least three sets of screws, and provides a very clean, and very compact housing for the drive itself.
take five or ten minutes to install the hard drive (which you must provide separately, no drives are included in the kit) from scratch. Installation is dead simple; the hard drive is connected up to the 80-pin IDE cable and molex power connector, and the entire assembly is slid into the one-piece aluminum chassis. With everything inside the unit all snug as a bug, a set of dovetailed covers slide into place on either side of the aluminum enclosure, and are capped off by a final back plate which is screwed into place as well. When it's all said and done, the Bytecc ME-350U2 locks the hard drive behind at least three sets of screws, and provides a very clean, and very compact housing for the drive itself.
Read more
