Date: 2026-02-21 01:59 | Last update:

Windows Hardware

A forum for discussions of Windows hardware and driver problems

Slack Space 1613 Legacy OS 455 Windows Hardware 9627 Windows Software 5498 Windows Games 5469 Windows Networking 2246 Customization Tweaking 1790 Feedback 1316 Everything New Technology 1823 Windows Security 292

Avatar

Got a BIG problem

UnderTaker
ok, the other day i bought winXP home upgrade, i installed and the following hardware had problems. MY modem: MDP3858V-WE Modem My Sound Card : PCI288-Q3D II(NX) PCI Audio these are both made by Aztech and are very good hardware.
9 1371
avatar Last reply by UnderTaker,
Avatar

LPT1 printer and cd burner

HwoodCats
I have a external cd burner and the only way to use it is if it's plugged into where the printer goes then plugging the printer into the back of the cd burner. I have tried unplugging the cd burner and plugging the printer in so I can use the printer but the computer wont even load windows when I do that.
0 815
avatar Last reply by HwoodCats,
Avatar

Bios

HwoodCats
I went to and tested my computer for xp (after I installed it hehe) and it says that my computer is sorta ready. It says that the bios date is not correct or something. Does that mean I need a new motherboard? I don't know how to upgrade a bios.
0 865
avatar Last reply by HwoodCats,
Avatar

Why xp doesn't like my Athlon?

wildcockis
I can't install WinXP. Installation always stops to screen setup is inspecting your hardware configuration and jams. I've also tried to update my current WinMillenium, but the result is still same. I got same problem with every NT based OS such win2k, I cant install 'em either.
2 922
avatar Last reply by wildcockis,
Avatar

Got a new scsi drive (how the hell do i hook it up)

Four and Twenty
ok here is the story i have a tyan 2400 mother board with onboard scsi the manual can be located here i just purchased a 10000 rpm seagate scsi drive model # ST118202LC the manual can be found here and the instll guide here ok here is the problem this drive has an 80 pin scsi connector and my motherboard has 2 68 p ...
3 2029
avatar Last reply by adrianhall,
Avatar

RAM Leaking

Palos
Hi there, I have 512MB Samsung PC2100 DDR RAM (CAS2. 5) and after W2K startup I end up with around 438 MB free. That's all nice and dandy, but last night I noticed that after installing some dodgy ASPI drivers and Fireburner 2.
3 1244
avatar Last reply by Palos,
Avatar

Dissabling Device to prevent BSOD from defctive Hardware/Dri

reversing_drive
I continually get a BSOD in Win2K SP2 were a reference to 'wdmaud. sys' is made. Someone mentioned before on these boards that 'wdmaud. sys' refers to MMSYSTEM Wave/Midi API mapper Could i disable some Multimedia Devices in Administrative Tools > Computer Management > Devices to prevent these Blue Screens.
0 1247
avatar Last reply by reversing_drive,
Avatar

I'm removing C:\ again

DremNeonBlack
I'm wondering if anyone have a good solution to my problem. I want to get rid of my dualboot. This is the setup: 15Gb C:\ winME (crap, I want it out. Only kept it for games anyway) 15Gb D:\ winXP 15-25Gb E:\ F:\ G:\ H:\ just stuff If I delete C:\ obviously I won't be able to boot anything, but isnt there some simpl ...
13 1744
avatar Last reply by DremNeonBlack,
Avatar

ACCESS to floppydrive

jos
At irregular moments a popup appears and says that the floppydrive contains no disk and asks to put a disk in it. Any idea what this can be ? I use Windows2000 Professional - SP2 on a HP Vectra PII-350 - 128MB Ram thanks Jos.
3 912
avatar Last reply by pbuckne,
Avatar

Is 1x512MB RAM "better" than 2x256MB

Ron_Jeremy
I am building my first AMD system & will be choosing a board outfitted with VIA's (I'm already in a panic) KT266a chipset. I was wondering if there's an advantage/disadvantage to using more or fewer RAM slots.
3 1158
avatar Last reply by pbuckne,
Avatar

Fix for 21.xx Detonators for VIA/AMD users?

Greggy
A possible solution for VIA/AMD users having problems with the 21. xx series drivers. . . Until last night my PC did not like the 21. xx Detonator drivers from nvidia. They seemed great for OpenGL, giving a nice little performance boost over the 12.
2 1763
avatar Last reply by pmistry,
Avatar

Win2k error in WinMgmt.exe

JohnnyChangs
Hi I've got a MSI K7T Pro2-RU motherboard and whenever I try to bump up the FSB by more that 3Mhz, Windows 2000 starts up, everything seems fine, and I get a Dr. Watson error telling me that WinMgmt.
2 2109
avatar Last reply by clutch,
Avatar

Logitech Gaming Mouse Problem

mikkol
Hi all! Im having little problem with my gaming mouse. (In Games) My mouse woun´t react to some moves. . . And it stays still. I have XP compatible Mouseware. .
0 1045
avatar Last reply by mikkol,
Avatar

BSOD only on cold boot

Onibaba
What could make XP crash with a BSOD (various messages: tcpip, pagefile, irq not less or. . . etc. ) only on a cold boot? When I reboot using the reset switch (not pwr off) everything's fine. I'm thinking: PSU, or maybe something good happens during the scandisk that I'm forced through on reboot? Please, gentlemen, ...
2 1400
avatar Last reply by Onibaba,
Avatar

Is this correct???

menasci
With WindowsXP I should: Install Liveware 3. 0 from the disk that came with my Sblive! 5. 1 card Then, Install the updated XP drivers from Creative. Is this correct??? Or should I JUST install the updated XP drivers from Creative?.
3 876
avatar Last reply by donald,
Avatar

SCSI IWill SIDE 2930Cand yamaha 8424

pb09
Hello, My yamaha SCSI 8424 reset sometimes, i don't know why. And I see this notes: But I'm on the SP2 and I already have the problem. Do someone know why? Motherbord MSI 6163 BX Master (Promise ATA66) SCSI IWill 2930C Yamaha 8424 1.
0 1737
avatar Last reply by pb09,