Windows Hardware
Dellwood
I need the drivers for the above card. This site says they were released, however the FTP link requires authentication for some reason. The adaptec site is of little help as usual for this card, not even mentioning the fact that the drivers were released! Any help would be GREATLY appreciated! (esp.
60 Hz bug with nvidia drivers: does somebody have a solution
valery
Hello everybody. . . I use the 27. 70 bêta drivers (detonator) for my geforce II mx 400 under micro$oft windows XP pro. Like a lot of my friends, when I play (with opengl or direct 3d) I have a refresh rate of 60 Hz.
a question for you pros...
Maasneotek
Is a page file really necessary if you have enough ram? I mean i have a LRGE amount of ram on my system, and virtual memory is just using the Hard drive as temporary ram right? so could i just DISABLE the page file ( Virtual memory) altogether? just a thought.
Hard drive problems. In URGENT need of help (if at all possi
shassouneh
Yes, this is from the same idiot who recently fried his processor, so lets get over that. . . LOL Now my hard drive (a 27. 9GB formatted one) has just crapped up on me. Its file system is now corrupt, and I have 14GB worth of Mp3s on it that I don't have access too I was wondering if any of you can help me with rec ...
Onboard LAN crapping out my 2940UW
Ron_Jeremy
I have searched these boards (& others) for help, but so far have come up short. If there is a similar thread somewhere on these boards, please point me to it for help! I have a ECS P6STMT mobo (only has 3 PCI slots, no AGP) that refuses to acknowledge my SCSI card if I enable the onboard NIC (SiS 900).
I have my T-bird 1 ghz running at 1.33 on a 8K7A is 1.5 wort
pr-man
I have not unlocked my T-bird yet. Is unlocking it and running at 1. 5 ghz worth it?.
DDR Ram question(s)
B00MER
Ive got an ASUS a7a266 MB, supporting 2 DDR and 3 SDR modules, Well right now I have a Samsung 256 module and I just recently got a Nanya 256 DDR stick from a friend, my problem is if both modules are installed I got a blue screen of death from api.
SuperDisk drive.....
RavishingRocket
somehow my comp set my drive letter to B instead of A and i wanna know how i can change it back to A. I've went into the control panel and to computer management, but its not listed under the drives.
The Motherboard Thread...
Brian Frank
I'm just starting this one to discuss motherboard's and motherboard companies. Companies that I think are good: Asus, Tyan, SuperMicro, AOpen. Companies that are coming along: Abit, Epox Companies that suck: FIC.
Asus A7N266-C sees only half the RAM
jtourville
I just bought an A7N266-C mobo (nForce 415-D chipset) with an Athlon XP 1900 and 2 512 MB strips of Mushkin PC2100 DDR. My problem is that the system only recognizes them as 256 MB strips, so it boots up with 512 MB total.
Shiny Happy Heatsinks :)
Alien
You know how in reviews of HSFs they tend to consider a smooth, shiny finish to the base of the heat sink to be a Good Thing? Well I was just wondering if those of you with some experience in the matter think I've managed to get mine shiny enough.
New system. What to get?
auger
Going to build my first sorta-kick-*** home system. Long overdue. I'm leaning Athlon XP 2100+ w/ Asus A7V266e motherboard, Volcano 7 Fan, Enermax 350 watt ps and 1G Micron PC 2100. Half assed considering one of the new 333 based chipsets.
possible 2nd computer
Yankee
I am thinking of purchasing the following used components from a friend to build a 2nd PC. He wants €420 for them. P3 750 15gb HDD Asus GeForce 256 32mb Asus P2-99 Mother board 192MB Ram- Generic (cheap) 48X CD rom Floppy Drive Sound Blaster Live 5.
althon xp 1800+ causing lockup? but athlon 1400 works fine?
sflesch23
ok here is the more bizarre thing i've seen yet. i tried to see how my system would work with the athlon xp 1800+ so i pulled it from my friends computer and put it in my and for some strange reason i got a stop: 0x0000008e (0x0000005, 0x80844c68, 0xf9e82d2c, 0x00000000) error code.
Add-in IDE controller question
GTwannabe
Ok, after adding my 120gig hard disk, I've maxed out my IDE controllers. Currently have the Orb drive disabled, and I have a Zip drive laying around which I can put in the system. If I get a PCI IDE controller card, will I be able to use 6 or 8 IDE devices?.
Problem with Gainward GF4 Ti 4400
*C4*
I just bought myself a brand spanking new graphics card, and after a long period of reading up decided on a Gainward GF4 Ti 4400, after seeing some impressive stats on various websites. Now, after installing it this morning and running 3d Mark 2001SE, I got 5900 3d Marks, which isnt what I was expecting as I had se ...
Can't Boot!
kyairan
Ok, I don't know what has happend at all, I turned my computer on about 10 mins ago and it loads up to the windows loading screen, the screen then goes black as if it was just about to load the desktop but stays black with no activity at all.
IBM T20-T22 image on a T23
ViperZ2000
Hi all! I know that IBM has support forums for their systems, but 'real world experience' counts for more than what is written in the text books. That said, here's my question: Has anyone been able to use an IBM T21/T22 image on an IBM T23? When I pull that image down on the T23, it bluescreens shortly afterward st ...
Hard drive questions.....
Hammer91
i just built the system below. the H/D's are ATA/66,would it be worth upgrading to a ATA/100 drive? Would i see a big difference in performance? Also, if i got a 80 GIG ATA/100 and also used one of the 40 gig ATA/66, would they run at their rated ATA speeds,or would they both run at ATA/66? Thanks for any help.