Windows Hardware
videobruce
I have a chance to pick up a GA-7ZXE M/B and I'm looking for anyone with experiance with that board. I serached for reviews high and low and could only come up with one in German! I found a number of reviews with the GA-7ZX (w/ the KT-133 chipset) but none of the ZXE! I also found reviews of the ZR (I believe it wa ...
Hard disk reported only as 8 GB?
pmistry
This has been bugging me for awhile. When I try to setup Windows 2000 with SP3 slipstreamed the text portion of setup will only recognize 8 GB of my 20 GB Maxtor DiamondMax Plus IDE drive. If I use my original Windows 2000 CD without any SP integrated, it detects the full drive capacity and there is no problem.
Installed PCTV and now neither of my cdroms is accesible
pr-man
Device manager has yellow exclamation points by both my dvd-rom and cd-rw. any ideas? im running winxp with ACPI Thx.
need advice on graphics cards
Tom!!
i want to purches a geeforce 4 but there are so many boards which one shall i go with? creative? im thinking of getting the 4600 for my new motherboard
JVC xr-w2010 driver win 2000
TroubledOne
I am looking for downloadable drivers for this drive. Worked awesome on win98, would hate to throw away. Any ideas?.
Please HELP!!!!
BD2002
I need a driver for a Acer 320U USB Scanner (Acer) for Windows 2000 can ANYone help me? I would be VERY Grateful if someone could show me a decent link. . . thanks.
nforce2
BanditXL
I'm not sure if this is the right place to put this but I'm gonna anyway. I got a few questions about the nvidia nforce2 igp and I hoped that I could use some of you're expertice on this. I have read some reviews on this board, but every one of them tests with a third party videocard, or with a higher clocked CPU o ...
Sidewinder Precision 2 Software ????? HELP
Tom!!
windows reconises the joystick but whenever i go to install the sofwear it says it cannot tell if the usb is connected can anyone help i am baffled
SCSI for my P4?
Marktait
Well guyz i am thinking of going for a £100ish 18GB 10krpm SCSI drive to use for booting windows and using on a few games. would this improve windows performance at all compared to my 7krpm IBM's? If so is it anoth improvement to sacrifice a weeks wages too? Thanx guyz.
Presario 900 Driver Issue
raheelk
I formatted WinXP Home Edition off of a Presario 906US notebook and installed Win2k Pro, but for some reason, it is not detecting the video card (ATI Radeon IGP 16mb) and I cannot seem to install the video card drivers from ATI, because it comes up with the error about hardware not being there.
Ms Intellimouse Problem
Bennyk
Mouse works great untill i try use right button on programs tab e. g sort menu,create shotcut from folder and properties. No box. But then when i click on start tab it works fine. Can someone help please thanks.
Creative 30.82 drivers or NVidias 40.72 Drivers??
Marktait
Wat would be best to use for my Creative GF4 Ti4600?? Thanx for your input
Windows 2000 Pro: CD burning hell
brblueser
Hi all, I've seen posts related to similar questions, but none seemed to give me a final solution to my probl, so here I am seeking for help from the gurus. . . I have Windows 2000 Pro on a Athlon XP, with a TDK VeloCD CD-RW (old model, 8x write).
Recovering data from a burnt out hard drive
HawkBoy
Is there a way to recover data from a hard drive burnt out (trust me, it is BURNT OUT) due to a power surge in the power supply without spending $800? I know that the chips on the HD are fried. I've checked with a few companies and they say that it will cost about 800 USD.
removed floppy drive, yet still in device manager
craigz
I removed my floppy drive from system, Asus P4T-C motherboard, and it still shows up in device manager. If I disable in boot menu from bios setup and set legacy drive as None the computer will not load windows.
P4 & hyper threading a "no-go" in Win2K?
Ron_Jeremy
Many of us already know the new 3. 06GHz & higher P4's will have hyper threading enabled, similar to their Xeon brothren. But, from reading some of the columns over at , it looks like HT may mean switching to WinXP.
Quality Power Supply?
Mekadave
Here's a question for everyone: How can you tell if your power supply is working ok, short of weird problems and errors? Asus PC Probe shows the different voltages (+12, +5, +3. 3, Vcore). Is there a range that those should stay within for safety/quality?.
Blue monitor
Ace
I got a Dell 2500 Inspiron laptop and I connect it to a CRT monitor which is about 7 years old and it's a Dell. It's been working for a year then about 2 weeks ago the screen is all blue but you can still see Windows over this blue.
Detonator Issues
evil Homer
Its been a while since I last posted here, been out in the scary real world. Anyways, I don't seem to be able to install any of the 40. xx series of detonator drivers on Windows XP. I have a GF3, which has worked fine with the other drivers.