Guides 11792 Published by Philipp Esselbach 0

USB Man has posted a list of all known USB Issues in Windows XP

Windows XP has a whole host of known USB issues
USBMan has the complete list with fixes and work-arounds in the newly updated USB Guide for Windows XP
Read more

Guides 11792 Published by Philipp Esselbach 0

DeviantPC has posted part 3 of the series entitled Liquid Cooling the Gainward Golden Sample 750/XP.

The pipe fittings and 90Β° elbows were test fitted to see it would all fit together. I then made the retainer. This is a 2mm star shaped copper piece that has a small square soldered to the center. This will locate on the back, (top in a tower case), of the card the center square fits inside the resistors on the rear of the card opposite the GPU. Holes in the corners of both star” & GPU block (with a M2 thread tapped into block) accept M2 screws. I placed a small square of mica shim (inert thermal rubber shim), between the retaining star and the area of the card it will contact to prevent damage to the PCB or and copper to component contact.
Read more

Guides 11792 Published by Philipp Esselbach 0

BitBender has posted a tutorial on Installing Windows XP - Step by Step.

Like Windows 2000, XP makes extensive use of the Microsoft ACPI (Advanced Configuration & Power Interface), which relies heavily on your system BIOS (Basic Input / Output System). Many slightly older systems may not be set up to take advantage of ACPI functionality, so it's worth checking with your motherboard and/or peripheral vendor to see if an ACPI compliant BIOS upgrade exists for your hardware.
Read more

Guides 11792 Published by Philipp Esselbach 0

eliteHW has posted the first of several modding articles. This one is on stealth-ing CDROM drives.

Guides 11792 Published by Philipp Esselbach 0

Livepc.tv has posted a LCD creation how-to. This how-to was written for both the case-modder, and the extreme overclocker.

Guides 11792 Published by Philipp Esselbach 0

Livepc.tv shows how to make RAMSinks. This howto is seperated into two parts: using an old CPU heatsink, and using an old NorthBridge heatsink.