CoolIT Eliminator CPU Cooler Review

For those that are familiar with water cooling the CoolIT Eliminator uses the same basic method, but uses three solid-state TECs to cool the coolant down rather than a traditional radiator. Water is pumped from the +12V water pump through tubing to the CPU water block. Once the coolant leaves the water block it becomes 'hot' and is cooled down by going through not one, but three TECs. This process works really well as the cold side of the TEC plate can easily cool the water, but the heat from the hot side of the plate still needs to be handled. To get rid of the heat generated from the TECs, CoolIT uses a radial heat sink to absorb the heat. A 92x92x38mm fan then sucks air through the radial heat sink and blows the air out of the case...