can you help 10/100mbit network
This is a discussion about can you help 10/100mbit network in the Windows Networking category; Hi I have 2 systems with a netvin 10/100 8 port hub with rpti isa 10/100 mbit cards linked with r j45 cable but the most i can get is 10mbit connection can anyone help me to get the 100mbit connection & the best ip address i am at this address.
Hi I have 2 systems with a netvin 10/100 8 port hub with rpti isa 10/100 mbit cards linked with r j45 cable but the most i can get is 10mbit connection can anyone help me to get the 100mbit connection & the best ip address i am at this address.
192.168.1.1
255.255.255.0
192.168.1.2
255.255.255.0
i have looked at the back of the hub but the only thing i can see is an in/out switch which did nothing for the speed.
thanks
192.168.1.1
255.255.255.0
192.168.1.2
255.255.255.0
i have looked at the back of the hub but the only thing i can see is an in/out switch which did nothing for the speed.
thanks
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Jun 21
Aug 9
0
3 minutes
Responses to this topic
Hello,
since you're on a small LAN, use these:
192.168.000.001 and 192.168.000.002
255.255.255.000 and 255.255.255.000
Also, check to see if your hub has a switch somewhere on it to switch between 10 or 100Mbps.
Another thing is, in Network properties of your NIC, make sure that neither of your NICs are set to 10Mbps, set them to Auto Negotiation, if that doesnt seem to work, set them all to 100Mbps Full Duplex
-
cap0ne
since you're on a small LAN, use these:
192.168.000.001 and 192.168.000.002
255.255.255.000 and 255.255.255.000
Also, check to see if your hub has a switch somewhere on it to switch between 10 or 100Mbps.
Another thing is, in Network properties of your NIC, make sure that neither of your NICs are set to 10Mbps, set them to Auto Negotiation, if that doesnt seem to work, set them all to 100Mbps Full Duplex
-
cap0ne
OP
Quote:Originally posted by cap0ne:
Hello,
since you're on a small LAN, use these:
192.168.000.001 and 192.168.000.002
255.255.255.000 and 255.255.255.000
Also, check to see if your hub has a switch somewhere on it to switch between 10 or 100Mbps.
Another thing is, in Network properties of your NIC, make sure that neither of your NICs are set to 10Mbps, set them to Auto Negotiation, if that doesnt seem to work, set them all to 100Mbps Full Duplex
-
cap0ne
thanks m8 will give it a go also the only switch i have says in/out have tried both but no joy.
Hello,
since you're on a small LAN, use these:
192.168.000.001 and 192.168.000.002
255.255.255.000 and 255.255.255.000
Also, check to see if your hub has a switch somewhere on it to switch between 10 or 100Mbps.
Another thing is, in Network properties of your NIC, make sure that neither of your NICs are set to 10Mbps, set them to Auto Negotiation, if that doesnt seem to work, set them all to 100Mbps Full Duplex
-
cap0ne
thanks m8 will give it a go also the only switch i have says in/out have tried both but no joy.
Maybe it's a limit of the architecture of the cards....ISA cards use a low speed bus, and the system simply cannot follow the entire flow of info at 100 Mbit....
Also keep in mind that the Win2k compatibility with ISA cards is kept as a last chance from Microsoft, they're going to a system architecture ISA-free...
Also keep in mind that the Win2k compatibility with ISA cards is kept as a last chance from Microsoft, they're going to a system architecture ISA-free...
Quote:Originally posted by remek:
Hi I have 2 systems with a netvin 10/100 8 port hub with rpti isa 10/100 mbit cards linked with r j45 cable but the most i can get is 10mbit connection can anyone help me to get the 100mbit connection & the best ip address i am at this address.
192.168.1.1
255.255.255.0
192.168.1.2
255.255.255.0
i have looked at the back of the hub but the only thing i can see is an in/out switch which did nothing for the speed.
thanks
I'd like a link to be posted to the place tha claims they make a 10/100 ISA network card. It's simply not done.
ISA has a bus bandwidth limit of 25MB/s. That's Obviously why you DON'T see 10/100 ISA cards out there. And... why you can't get 100Mbit to work.
Hi I have 2 systems with a netvin 10/100 8 port hub with rpti isa 10/100 mbit cards linked with r j45 cable but the most i can get is 10mbit connection can anyone help me to get the 100mbit connection & the best ip address i am at this address.
192.168.1.1
255.255.255.0
192.168.1.2
255.255.255.0
i have looked at the back of the hub but the only thing i can see is an in/out switch which did nothing for the speed.
thanks
I'd like a link to be posted to the place tha claims they make a 10/100 ISA network card. It's simply not done.
ISA has a bus bandwidth limit of 25MB/s. That's Obviously why you DON'T see 10/100 ISA cards out there. And... why you can't get 100Mbit to work.
use:
192.168.0.1 for localhost
255.255.255.0
192.168.0.2 for other computer
255.255.255.0
remember to edit you "hosts" file.
192.168.0.1 for localhost
255.255.255.0
192.168.0.2 for other computer
255.255.255.0
remember to edit you "hosts" file.
the ip`s really doesnt matter if your not using a PROXY server you can use 192.168.0.45 or 198.200.100.4 really the ip dosent matter if your not using it for PROXY but the isa cards some of the the go up to 10mpbs and not full 100
------------------
dATAqUEST
irc.prchat.org
#jodachat
------------------
dATAqUEST
irc.prchat.org
#jodachat
