Matsu****a CW-7502B
This is a discussion about Matsu****a CW-7502B in the Windows Hardware category; I'm using RC2 (italian version). . . Everything seems to work fine, except my CW-7502B cd recorder. The pre-install plug'n'play scan didn't find it. . . I added it with Add new hardware as Matsu****a CW-7502 CD/DVD ROM, but when I reboot the system the recorder disappears.
I'm using RC2 (italian version)... Everything seems to work fine, except my CW-7502B cd recorder.
The pre-install plug'n'play scan didn't find it... I added it with "Add new hardware" as "Matsu****a CW-7502 CD/DVD ROM", but when I reboot the system the recorder disappears... What's up?
I'm using an adaptec 7890 U2W controller on an ASUS P2B/S mobo.
The cd recorder works fine in W98 SE: its SCSI Id is 1. On 2 I have a Plextor 32x-t that works perfectly in Win98 and Win2k.
I even tried to update the ASPI drivers with the ones I found on the Adaptec site, but nothing changed...
The pre-install plug'n'play scan didn't find it... I added it with "Add new hardware" as "Matsu****a CW-7502 CD/DVD ROM", but when I reboot the system the recorder disappears... What's up?
I'm using an adaptec 7890 U2W controller on an ASUS P2B/S mobo.
The cd recorder works fine in W98 SE: its SCSI Id is 1. On 2 I have a Plextor 32x-t that works perfectly in Win98 and Win2k.
I even tried to update the ASPI drivers with the ones I found on the Adaptec site, but nothing changed...
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Jan 20
Jan 20
0
1 minute
Responses to this topic
Put the CW-7502B SCSI Id on 2. & Plextor 32x-t on 1 or 3
OP
Great!!
It worked perfectly....
But I can't figure why !
tnx, anyway!!
It worked perfectly....
But I can't figure why !
tnx, anyway!!
That eazy the CW-7501B & 2B is a SCSI-1 where the Plextor 32x-t is SCSI-2 so it working backwords ekk Both NT4 & Windows2000 don't like it.
All so SCSI ID-1 is must use for Harddrive
or Highspeed CDROM SCSI-2 interface
with the SCSI card you have.
Win98 can getway with this dew to the fact it still run 16bit code.
All so SCSI ID-1 is must use for Harddrive
or Highspeed CDROM SCSI-2 interface
with the SCSI card you have.
Win98 can getway with this dew to the fact it still run 16bit code.
OP
Understood!
Tnx a lot!
Tnx a lot!
