GeForce under Win2000

This is a discussion about GeForce under Win2000 in the Windows Hardware category; I'm desperately trying to get my ASUS 6600 Pure to run unter Win2K. System config: Athlon/750, 512 MB RAM, Abit KA7 Mainboard, Adaptec 29160N SCSI, Intel 100Mbit Ethernet The 4in1 4. 22 drivers as well as the AGP updated 4.

Windows Hardware 9627 This topic was started by , . Last reply by ,


data/avatar/default/avatar17.webp

14 Posts
Location -
Joined 2000-06-25
I'm desperately trying to get my ASUS 6600 Pure to run unter Win2K.
 
System config:
Athlon/750, 512 MB RAM, Abit KA7 Mainboard, Adaptec 29160N SCSI, Intel 100Mbit Ethernet
 
The 4in1 4.22 drivers as well as the AGP updated 4.03 drivers are installed and working.
 
I installed the 5.22, 5.25, 5.30 Detonator2 drivers from NVIDIA; the ASUS drivers cause the system to hang during boot-up.
 
I'm at my wits' end, thus any help will be greatly appreciated. Thanx...

Participate in our website and join the conversation

You already have an account on our website? To log in, use the link provided below.
Login
Create a new user account. Registration is free and takes only a few seconds.
Register
This subject has been archived. New comments and votes cannot be submitted.
Jun 25
Created
Jul 3
Last Response
0
Likes
2 minutes
Read Time
User User User User User
Users

Responses to this topic


data/avatar/default/avatar26.webp

362 Posts
Location -
Joined 2000-03-16
Your system is similar to mine. I also have the KA7. When I installed my Annihilator 2, it work give me a blue screen on boot. Turned out to be a faulty memory chip.
 
Have you tried to disable the 4x AGP support in the BIOS and see if that works?

data/avatar/default/avatar17.webp

14 Posts
Location -
Joined 2000-06-25
OP
Nope, doesn't work.

data/avatar/default/avatar17.webp

14 Posts
Location -
Joined 2000-06-25
OP
oh BTW, this probably isn't a hardware problem with the card, since it worked great under NT4...
 
Regards

data/avatar/default/avatar26.webp

362 Posts
Location -
Joined 2000-03-16
What size power supply do you have?

data/avatar/default/avatar17.webp

14 Posts
Location -
Joined 2000-06-25
OP
The power supply chunks out 235W.

data/avatar/default/avatar14.webp

274 Posts
Location -
Joined 2000-03-11
Capt'n, we're gonna need mo' power!!!
 
:}
 
[This message has been edited by Dragon-Lord (edited 26 June 2000).]

data/avatar/default/avatar24.webp

43 Posts
Location -
Joined 2000-02-04
If you are running a Athlon system, you should have a MINIUM power supply of 250W. Personally, I wouldn't buy anything under 300W, then you are sure you have enough!
 
------------------
AMD Athlon 750MHz
ASUS K7V
ASUS V6800 PURE
128MB 133RAM
20,5 GB IBM HD

data/avatar/default/avatar17.webp

14 Posts
Location -
Joined 2000-06-25
OP
Thanks all, I got it working now.
 
"Standard PC" instead of "ACPI PC" in Device Manager is the key.
 
CU around
 
*DUKE*

data/avatar/default/avatar26.webp

24 Posts
Location -
Joined 2000-06-18
That's odd. I have a KA7 and CLAP2 and win2k would not boot unless I had ACPI enabled.

data/avatar/default/avatar31.webp

3 Posts
Location -
Joined 2000-07-03
I have a duel P3 Xeon 550 with a Tyan Thunder X motherboard and a Hercules 3D Prophet II 64mb and when I use the 5.22 or 5.3 drivers, I blue screen as soon as I start a game.