How can I Install WIN2Kpro on a RAID Stripe????
This is a discussion about How can I Install WIN2Kpro on a RAID Stripe???? in the Windows Hardware category; I Have a big problem !! I want to Install WIN2Kpro on a RAID Stripe (RAID 0 aktually formatted as a FAT32 Partition) I start the installation and win2k copies the Datas on my Stripe then win2k reboots and wants to have the Drivers for SCSI Drives and I Install the win2k Driver from my Raid Controller ( Promise Fast ...
I Have a big problem !!
I want to Install WIN2Kpro on a RAID Stripe (RAID 0 aktually formatted as a FAT32 Partition)
I start the installation and win2k copies the Datas on my Stripe then win2k reboots and wants to have the Drivers for SCSI Drives and I Install the win2k Driver from my Raid Controller ( Promise FastTrak66 RAID)
and the instalation continues without problems until the moment when I should tell win2k the Installation Partition
then a got a Blue Screen and he tells me "No accecible Boot Device Found"
HOW can I manage the win2k installation ??
I want to Install WIN2Kpro on a RAID Stripe (RAID 0 aktually formatted as a FAT32 Partition)
I start the installation and win2k copies the Datas on my Stripe then win2k reboots and wants to have the Drivers for SCSI Drives and I Install the win2k Driver from my Raid Controller ( Promise FastTrak66 RAID)
and the instalation continues without problems until the moment when I should tell win2k the Installation Partition
then a got a Blue Screen and he tells me "No accecible Boot Device Found"
HOW can I manage the win2k installation ??
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Jan 31
Feb 8
0
2 minutes
Responses to this topic
Many people are having difficulty installing W2K onto single drivers connected to this controller - so much so that the way out is to plug it into an ATA33 for the install, then swap it back once the install of W2K and the ATA66 drivers is complete.
I can tell you from personal experience that installing NT of any flavour onto a drive controller not recognised natively is a real pain - and only better drivers and/or a BIOS upgrade will help.
So the solution is...no solution, until the IHV gets their act together...
Unless...is the volume > 16Gb? Another forum member reported problems with a 20Gb vol not booting...
I can tell you from personal experience that installing NT of any flavour onto a drive controller not recognised natively is a real pain - and only better drivers and/or a BIOS upgrade will help.
So the solution is...no solution, until the IHV gets their act together...
Unless...is the volume > 16Gb? Another forum member reported problems with a 20Gb vol not booting...
http://www.promise.com/techsupport/Notes/windows_2000_rc2_installation_FT66.htm
Very specific details on installing this controller under Win2k. I have it up and running on my system with 2 IBM 15g drives striped as one.
Try doing a search for Fasttrak and Promise and read the thread about this controller.
Ed
Very specific details on installing this controller under Win2k. I have it up and running on my system with 2 IBM 15g drives striped as one.
Try doing a search for Fasttrak and Promise and read the thread about this controller.
Ed
wish it would work for my fastrack (33).....(whine)
