I tested/installed the new det drivers 3.64
This is a discussion about I tested/installed the new det drivers 3.64 in the Windows Hardware category; not even a. 01 performance increase in all opengl games and applications. Did not test d3d performance. BUT I did notice an improvement in stability. every time I notice any kind of crash, concerning sound, video card, software, I try to write it down somewhere.
not even a .01 performance increase in all opengl games and applications. Did not test d3d performance.
BUT I did notice an improvement in stability. every time I notice any kind of crash, concerning sound, video card, software, I try to write it down somewhere.
My system would halt and crash with some games while changing their resolution and color depth while in game. And I retested those games and now no crash or blue screen. I still hade some issues with unreal BUT the system did not crash and I Was able to kill it using the taskmanager. It only happened once though I tried to duplicate the problem again but it worked flawlessly the second time.
gimme ur feedback as well fellas it helps when I write up these RC reports.
BUT I did notice an improvement in stability. every time I notice any kind of crash, concerning sound, video card, software, I try to write it down somewhere.
My system would halt and crash with some games while changing their resolution and color depth while in game. And I retested those games and now no crash or blue screen. I still hade some issues with unreal BUT the system did not crash and I Was able to kill it using the taskmanager. It only happened once though I tried to duplicate the problem again but it worked flawlessly the second time.
gimme ur feedback as well fellas it helps when I write up these RC reports.
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Nov 29
Dec 3
0
3 minutes
Responses to this topic
dude, how about a link to the drivers?
OP
doh! I figured they were old cuz I just got back in from thanksgiving and saw them on the first site I went to.. sorry bout that
for win2k go here version 3.64
http://www.3dchipset.com/beta/W2k-364.zip
for win9x go here versio 3.62
http://www.3dchipset.com/beta/W9x-362.zip
for win2k go here version 3.64
http://www.3dchipset.com/beta/W2k-364.zip
for win9x go here versio 3.62
http://www.3dchipset.com/beta/W9x-362.zip
Upgraded my driver from 3.56 to 3.64 on my RC3 system. Reboot and the system crashed resulting in a re-boot. Starting in save mode to revert to the previous level did not work either. I must admit that during installation of 3.64 Windows gave a severe warning that this driver was not for this device ! This was followed by the Unsigned warning , which is normal. I had to recover my system with the aid of a second w2k platform by means of copying the old modules in their appropriate directories. Big Fun. Next time I install this kind of stuff on a test system first.
year, i had same problem here with RC2 and TNT 1.
I tried to install 3.64 but win2000 warning me and then restart in VGA safe mode...
I get back to 3.56.
BTW, i have problem with Q3A and glitching 3D artifacts on bottom of screen with 3.56
Seems 3.64 correct this. Too bad.
I tried to install 3.64 but win2000 warning me and then restart in VGA safe mode...
I get back to 3.56.
BTW, i have problem with Q3A and glitching 3D artifacts on bottom of screen with 3.56
Seems 3.64 correct this. Too bad.
The detonator 3.64 Drivers are solely for RC3, if you try intalling them on anything else you will receive many problems, so remember only RC3.
chameleon's win2kbox.8m.com
chameleon's win2kbox.8m.com
OP
Good looking out there Cham.
Im running it on build 2176 and rc3 they seem to work much better for me then the older versions. Sorry to hear about ur bad expereince fellas, hope I didint cause to much trouble with ur box's.
Khan
Im running it on build 2176 and rc3 they seem to work much better for me then the older versions. Sorry to hear about ur bad expereince fellas, hope I didint cause to much trouble with ur box's.
Khan
has anyone found a tnt tweak program.....to adjust gamma, overclocking, and such settings just wondering....i really miss being able to tweak out my nvidia card
Thanx for the tip chameleon, i didn't know that...
BTW, to correct Q3A glitching, with 3.56 RC2, you should replace the nvoglnt.dll by the 3.64 one ! it works great for me !
But you try to change the nv4_disp.dll and/or nv4_mini.sys it fails at start up...
Hope it will help RC2 users and Q3A fans !
BTW, to correct Q3A glitching, with 3.56 RC2, you should replace the nvoglnt.dll by the 3.64 one ! it works great for me !
But you try to change the nv4_disp.dll and/or nv4_mini.sys it fails at start up...
Hope it will help RC2 users and Q3A fans !
OP
rogue get power strip, they got one out for win2k.
www.3dfiles.com
on the left hand column goto utilities and ull find it, its simple
www.3dfiles.com
on the left hand column goto utilities and ull find it, its simple
