Liveware 3 and win2000 & it works! to
This is a discussion about Liveware 3 and win2000 & it works! to in the Windows Hardware category; Look it soon
Look it soon
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Nov 3
Nov 10
0
10 minutes
Responses to this topic
Care to Elaborate?
OP
I send to you
Thanks, does this only work for Build 2151?
OP
it should work with older builder
could you send to me too, please?
so how does it work, im gonna install it when i get home.
This is big very big, almost as big as the time i got my cdr workign in win2k
now all my hardware works..
This is big very big, almost as big as the time i got my cdr workign in win2k
now all my hardware works..
Has anyone been successful in geeting this to work on 2128? (the "fix" instructions state that you "need" 2151).
Also, how about SMP? I had heard that liveware for NT had problems in SMP...
daniel
Also, how about SMP? I had heard that liveware for NT had problems in SMP...
daniel
So... Does this mean that digital out and four speaker support are enabled? Or just that the LiveWare applets work?
I have had Liveware 3.0 working for over a month....So i know the fix does work (i did pretty much the same thing the fix states on my own)...It enable all your speakers, effects etc...
Ed
[This message has been edited by ed28 (edited 03 November 1999).]
Ed
[This message has been edited by ed28 (edited 03 November 1999).]
Need a little help ....
Everything works fine until I try to install the Liveware 3 itself ... the downloaded version ...
- So, I rename the setup.ex_ , window opens and goes to 100%, window closes, nothing else happens.
- I check with the Task Manager what's going on ... SETUP.EXE process runs for a short while, closes, _ISDel.exe process starts and sits there idle forever, same with _INS5576._MP ... ARGH, what the **** is going on here ?? Is my download corrupted (I get the files when I unzip the Liveware3 zipfile) ??
I can imagine that the second file is a BMP ... what's it's full name ? And what's the complete name for the unknown EXE ?
Any help is appreciated, please
One more thing, after I follow instruction step 3 (drivers) I have no trouble in my device manager but when I click on the SB Live properties it shows No Drivers Installed but shoes the files when I check the Driver details ...
Well, back to the SB Live WDM for now
[This message has been edited by DocSilly (edited 04 November 1999).]
Everything works fine until I try to install the Liveware 3 itself ... the downloaded version ...
- So, I rename the setup.ex_ , window opens and goes to 100%, window closes, nothing else happens.
- I check with the Task Manager what's going on ... SETUP.EXE process runs for a short while, closes, _ISDel.exe process starts and sits there idle forever, same with _INS5576._MP ... ARGH, what the **** is going on here ?? Is my download corrupted (I get the files when I unzip the Liveware3 zipfile) ??
I can imagine that the second file is a BMP ... what's it's full name ? And what's the complete name for the unknown EXE ?
Any help is appreciated, please
One more thing, after I follow instruction step 3 (drivers) I have no trouble in my device manager but when I click on the SB Live properties it shows No Drivers Installed but shoes the files when I check the Driver details ...
Well, back to the SB Live WDM for now
[This message has been edited by DocSilly (edited 04 November 1999).]
Let me guess... you have a dual processor system?
This is been reported for the past few days. The "fix" soed not work on SMP systems because the stup utility dies without uninstalling anything. Apparently this happens in NT also and creative released a "patch" that was supposed to fit it, but it does not seem to work on SMP systems.
I run a BP6 with two OC'd celerons and had the same problem.
This is been reported for the past few days. The "fix" soed not work on SMP systems because the stup utility dies without uninstalling anything. Apparently this happens in NT also and creative released a "patch" that was supposed to fit it, but it does not seem to work on SMP systems.
I run a BP6 with two OC'd celerons and had the same problem.
Nope, single PII 450 slightly OC at 504 on ASUS P2B-LS (only a single CPU mobo). The problem has to be somewhere else ...
so it doesnt work in nt either? I have not tried yet, im waiting for more info.i have a dual cpu. I was thinking of starting up with a single and then installign and then going back to dual but that may just be a waste of time.. oh well
Hmmm.... if its not an SMP thing, maybe there is still hope. do you have any ideas on why the setup utility dies?
I have no time right now to check any further ... interesting alone the second problem with the SB driver that I mentioned in my first post.
Well, I managed to bring back the WDM, I have to play EverCrack, poblems have to wait for weekend
Well, I managed to bring back the WDM, I have to play EverCrack, poblems have to wait for weekend
DocSilly is not the only one !!!
I have the same symptoms.
Actually I have fudged it through the hanging SETUP once cleaning out all old Live directories, registry keys and unistalling the h/w. Even after all this I run setup ok but all the Live3 apps still hang immediately. Plus worst of all, the previously working drivers got stuck into some sort of default reverb!!! All my MP3s sounded like they were playing on a cheap transister!!!
Sound still works though - bugger!!
W98SE with LIVE2 is cool on the same dual boot box so the pnp is OK.
Any ideas?
Oh BTW, if I follow the instructions in the patch exactly, I get a boot failure loading the EMU1000 driver. Real fatal, SAFE cannot load either, luckily I can access the NT partition (FAT!!!) and zap the driver to boot into NT and re-load the driver.
Cheers
I have the same symptoms.
Actually I have fudged it through the hanging SETUP once cleaning out all old Live directories, registry keys and unistalling the h/w. Even after all this I run setup ok but all the Live3 apps still hang immediately. Plus worst of all, the previously working drivers got stuck into some sort of default reverb!!! All my MP3s sounded like they were playing on a cheap transister!!!
Sound still works though - bugger!!
W98SE with LIVE2 is cool on the same dual boot box so the pnp is OK.
Any ideas?
Oh BTW, if I follow the instructions in the patch exactly, I get a boot failure loading the EMU1000 driver. Real fatal, SAFE cannot load either, luckily I can access the NT partition (FAT!!!) and zap the driver to boot into NT and re-load the driver.
Cheers
OP
To all those who are haveing problem with Liveware3 I be make Picture ver step bye step.
Hang in there it will take few days to make I should have done late firday or afternoon satday.
Hang in there it will take few days to make I should have done late firday or afternoon satday.
Still no go ... but I want to thank for the ongoing support by all the people on this board
Thank you. I'm looking forward to see the new instructions.
Thank you. I'm looking forward to see the new instructions.
I followed the instructions and tried this several times. Your new, step by step instructions are great. That is exactly what I did. After I installed Liveware 3.0 from the CD and reboot, the creative programs show up in Task Manager -> Processes and are using 0 cpu but they do not show up in Task Manager -> programs and from the desktop do not appear to be running.
is there anyone able to use direct sound acceleration when liveware 3 is installed?
in my case, just only dsound emulation is available.
in my case, just only dsound emulation is available.
