SMP Nightmare !!!
This is a discussion about SMP Nightmare !!! in the Windows Hardware category; I have recently installed 2 identical p3 500 into BrillianX IV, with one CPU it runs fine, with the second cup utilization is at about 30% constantly and it slow and jerky, Fade effect kills the machine.
I have recently installed 2 identical p3 500 into BrillianX IV, with one CPU it runs fine, with the second cup utilization is at about 30% constantly and it slow and jerky, Fade effect kills the machine. I have tried both MPS 1.1 and 1.4, but I loose the USB support. I have ensured that the correct HAL for MPS Multiprocessor is installed, can anyone help ????
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Aug 6
Aug 10
0
1 minute
Responses to this topic
Do you have an ABIT BP6 motherboard?
Certain BIOS revisions for this board have been known to do this. If so, download the latest BIOS revision, and it should fix it.
Certain BIOS revisions for this board have been known to do this. If so, download the latest BIOS revision, and it should fix it.
Do you have an ABIT BP6 motherboard?
Certain BIOS revisions for this board have been known to do this. If so, download the latest BIOS revision, and it should fix it.
Certain BIOS revisions for this board have been known to do this. If so, download the latest BIOS revision, and it should fix it.
He couldn't have an Abit BP6 and have P!!! CPU's. The BP6 only supports Dual Celeron socket 370's.
What mobo do you have?
What mobo do you have?
Rigth down the number off the cpu & post it here.
something like this
08431045-SL2WM
300/66 Costa Rica
[This message has been edited by SHS (edited 09 August 2000).]
something like this
08431045-SL2WM
300/66 Costa Rica
[This message has been edited by SHS (edited 09 August 2000).]
I missread the message as dual PII...
