System randomly reboot under Win2K
This is a discussion about System randomly reboot under Win2K in the Windows Hardware category; Hi, I have been trying to solve this problem over the weekends, but still unable to come up with a solution. Here is my system configuration: - Celeron 566 (SL46T) o/c 850 using 1. 65v - ABit VT6X4 (supports ATA66) - Spectek PC100 128 mb ram - IBM 10.
Hi,
I have been trying to solve this problem over the weekends, but still unable to come up with a solution.
Here is my system configuration:
- Celeron 566 (SL46T) o/c 850 using 1.65v
- ABit VT6X4 (supports ATA66)
- Spectek PC100 128 mb ram
- IBM 10.1 gb 7200rpm HDD
- Quantum 3.2 gb 5400rpm HDD
- Creative OEM TNT2 value (M64)
- Creative AWE 64 Gold
- Intel PCI 10/100 NIC
- 3Com ISA NIC
- OEM Iomega internal 100 mb zip drive
- Teac 24x IDE cd-rom
- Internal Compro CD-R drive with PCI SCSI card
- and the usual stuff for a complete PC, plus 1 front casing fan, 2 HDD coooler, 1 slot cooler and 1 Golden ORB.
Previously running Win98 with no problems, and even with Winnt 4.
Now have re-formatted the HDDs and installed Windows 2000 Professional. Installation and boot up with no problems. All devices using drivers provided by Windows 2000 Professional. I am now facing the problem of the whole system will suddenly reboot by itself. The problem does not has a specific timing when it occurs, which means it occurs randomly. But it occurs each time I boot up and logged in to Win2K.
Anyone came across this problem, or knows the solution to this problem, can you pls enlighten me. One thing I noticed is that, Windows 2000 Professional version, reads the HDDs quite intensively.
I have tested almost all the hardware and the power supply unit, and suspect is the problem with the drivers, but could not figure out which are the ones giving problems.
I can be contacted @ this email address incom@netnet.com.sg.
Thanks
Regards
I have been trying to solve this problem over the weekends, but still unable to come up with a solution.
Here is my system configuration:
- Celeron 566 (SL46T) o/c 850 using 1.65v
- ABit VT6X4 (supports ATA66)
- Spectek PC100 128 mb ram
- IBM 10.1 gb 7200rpm HDD
- Quantum 3.2 gb 5400rpm HDD
- Creative OEM TNT2 value (M64)
- Creative AWE 64 Gold
- Intel PCI 10/100 NIC
- 3Com ISA NIC
- OEM Iomega internal 100 mb zip drive
- Teac 24x IDE cd-rom
- Internal Compro CD-R drive with PCI SCSI card
- and the usual stuff for a complete PC, plus 1 front casing fan, 2 HDD coooler, 1 slot cooler and 1 Golden ORB.
Previously running Win98 with no problems, and even with Winnt 4.
Now have re-formatted the HDDs and installed Windows 2000 Professional. Installation and boot up with no problems. All devices using drivers provided by Windows 2000 Professional. I am now facing the problem of the whole system will suddenly reboot by itself. The problem does not has a specific timing when it occurs, which means it occurs randomly. But it occurs each time I boot up and logged in to Win2K.
Anyone came across this problem, or knows the solution to this problem, can you pls enlighten me. One thing I noticed is that, Windows 2000 Professional version, reads the HDDs quite intensively.
I have tested almost all the hardware and the power supply unit, and suspect is the problem with the drivers, but could not figure out which are the ones giving problems.
I can be contacted @ this email address incom@netnet.com.sg.
Thanks
Regards
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Jun 22
Jun 24
0
3 minutes
Responses to this topic
Yes currently i'am getting this problem.
I installed drivers for my tnt2, then uninstalled them, and installed older drivers, but during the uninstall it didn't remove those files, so now filemon is showing my tnt2 accessing files from two different files.
I also have a event error which is winspool.exe, this causes my system to lag 15 seconds when im in windows.
Philip
I installed drivers for my tnt2, then uninstalled them, and installed older drivers, but during the uninstall it didn't remove those files, so now filemon is showing my tnt2 accessing files from two different files.
I also have a event error which is winspool.exe, this causes my system to lag 15 seconds when im in windows.
Philip
Well, you certainly have some driver problems. Usually display drivers are the ones which make a computer reboot. Be sure to install all the latest drivers you can find for your peripherials. I had a VERY unstable system, then installed ALi AGP drivers (I have an ALI based motherboard) and the latest Matrox drivers and the problems went away.
OP
Hi,
Thanks for all the replies, I managed to stop the random reset problem, but every now and then I get the BSOD => (need to reset PC). The error I am getting is something like this:
*** STOP: 0x0000001E C0xC0000005, 0xA00178C1, 0x00000001, 0x3C808B0C
KMODE_EXCEPTION_NOT_HANDLED
*** Address A00178C1 base at A0000000, DateStamp 38438ff7 - win32k.sys
Anyone knows the exception is regarding about what's wrong with my system.
Thanks
Regards
Thanks for all the replies, I managed to stop the random reset problem, but every now and then I get the BSOD => (need to reset PC). The error I am getting is something like this:
*** STOP: 0x0000001E C0xC0000005, 0xA00178C1, 0x00000001, 0x3C808B0C
KMODE_EXCEPTION_NOT_HANDLED
*** Address A00178C1 base at A0000000, DateStamp 38438ff7 - win32k.sys
Anyone knows the exception is regarding about what's wrong with my system.
Thanks
Regards
