W2K + BP6 + MPS1.4 + USB possible?
This is a discussion about W2K + BP6 + MPS1.4 + USB possible? in the Windows Hardware category; Hi there, Just a quick question: Using a bp6 board and setting mps to 1. 4 in the bios and running w2k is it possible to use the usb? Thank in advance! GReYHouND. .
Hi there,
Just a quick question:
Using a bp6 board and setting mps to 1.4
in the bios and running w2k is it possible
to use the usb?
Thank in advance!
GReYHouND.
Just a quick question:
Using a bp6 board and setting mps to 1.4
in the bios and running w2k is it possible
to use the usb?
Thank in advance!
GReYHouND.
Participate in our website and join the conversation
This subject has been archived. New comments and votes cannot be submitted.
Mar 6
Mar 8
0
2 minutes
Responses to this topic
Yes you can with the new beta bios QQ-2 which
tou can find at http://www.bp6.com.
If you do not wish to load a beta just go back to mps 1.1 till the full vertion bios comes out.
this will fix the error you see on the usb hardware.
The new bios will also give you your power management back (shstem will shutdown when exiting)
You will need too reload win2k clean or over it's self using the repair option too keep all your settings.
Third party driver not certifide will be lost and need too be reloaded.
There is a shortage of usb device driver for win2k you may have to hunt alot.
this is one of the best places i found to start looking.
GoodLuck
Wallaby
Quote:Originally posted by GReYHouND:Hi there,
Just a quick question:
Using a bp6 board and setting mps to 1.4
in the bios and running w2k is it possible
to use the usb?
Thank in advance!
GReYHouND.
tou can find at http://www.bp6.com.
If you do not wish to load a beta just go back to mps 1.1 till the full vertion bios comes out.
this will fix the error you see on the usb hardware.
The new bios will also give you your power management back (shstem will shutdown when exiting)
You will need too reload win2k clean or over it's self using the repair option too keep all your settings.
Third party driver not certifide will be lost and need too be reloaded.
There is a shortage of usb device driver for win2k you may have to hunt alot.
this is one of the best places i found to start looking.
GoodLuck
Wallaby
Quote:Originally posted by GReYHouND:Hi there,
Just a quick question:
Using a bp6 board and setting mps to 1.4
in the bios and running w2k is it possible
to use the usb?
Thank in advance!
GReYHouND.
One to watch out for is that if you are using 2 cpus make sure that the drivers are compatible with multi cpu systems.
I've been getting IRQL equal to or less than blue screen of deaths.
I've been getting IRQL equal to or less than blue screen of deaths.
OP
Thanks wallaby and simonroockley!
I installed w2k on bios qq, then
flashed to latest bios, then reinstalled
usb controller, but that didn't work
(still code 35). I will try repairing
the OS on the newest bios today.
Thanks again,
GReYHouND.
I installed w2k on bios qq, then
flashed to latest bios, then reinstalled
usb controller, but that didn't work
(still code 35). I will try repairing
the OS on the newest bios today.
Thanks again,
GReYHouND.
After you flash to the latest 03/03 QQ BIOS and change the MPS to 1.4, you'll have to re-install win2k with the 'upgrade' option for everything to be in working order again.
Quote:Originally posted by GReYHouND:Thanks wallaby and simonroockley!
I installed w2k on bios qq, then
flashed to latest bios, then reinstalled
usb controller, but that didn't work
(still code 35). I will try repairing
the OS on the newest bios today.
Thanks again,
GReYHouND.
Quote:Originally posted by GReYHouND:Thanks wallaby and simonroockley!
I installed w2k on bios qq, then
flashed to latest bios, then reinstalled
usb controller, but that didn't work
(still code 35). I will try repairing
the OS on the newest bios today.
Thanks again,
GReYHouND.
