Windows Hardware
miku
Hi, I installed porshe unleased and it was not working. it hanged @ the startup screen. Then i deleted gimme. dlll(stated in results) and it started working perfectly. Now, what is the purpose of gimme.
Bad 3Com NIC
Wrath
A warning to any of you who may be in the market for a new NIC my favorite 3com NIC isn't supported in win2k. I learned this the hard way. I recently chose to move over to Win2k instead of WinME. . .
Vibrating Hard Disks!
Pikey
I hate to disgace this forum with a complaint as trivial as this, but here goes: I have recently installed a second IBM IDE 30. 7GB Deskstar HDD to complement my existing drive. It's a good fast disk and the noise it make while in action is reasonably quiet compared to some others.
Geforce MX
miku
Hi, You should get the Geforce MX. It is simply great. The 3D performance is excellent, though compared to a GTS, it is 500-700 3D MARKS points low. The quality of the TV out is excellent, very smooth and well accelerated.
Printer Minolta PagePro 6L under W2K
larsvegas75
In the Hardware section of the page it is stated that the above named printer is running under W2K. But there is no driver for W2K. With the W98 driver it isn't running, so what driver should I use? There is also no driver for WinNT.
SuperMicro Board & Whistler
grog
I cant get Whistler to install On this board at all - doesnt boot from CD or from initial menu screen immediately goes blank and the system hangs. I have stripped the system down to nothing and still no joy.
Geforce
miku
Update your Motherboard Bios from Asus. It worked for me. If you still have problems, visit, ARC.
Moving f: to c:
ancker
I plan to rebuild my machine. . . but i would like to NOT have to reinstall win3k. Right now win2k Pro is installed to F:, i want to move it to my C: drive soon. Are there issues that i have to worry about? Are there any programs that will help me?? Thanks Ancker Jade.
Abit VP6 + Celeron FCPGA = Will it work?
EddiE314
Abit VP6 Dual Socket 370 Mobo, does it support Celeron FCPGA's?
Anyone use the USR Databurst ISDN w/W2k?
vbobier
Anyone use the USR Databurst ISDN w/W2k? I just bought one for $17. 75($8. 00+$0. 66tax+$9. 09ship. ), If someone does know about this isdn device, It attaches to the printer port, And in case someone asks why ISDN? When DSL is available I'll convert to ADSL, right now Verizon has no plans for any DSL service where ...
weird reboots
Allanv
ok here we go i have an AMD 1. 1ghz and on a cold boot it will get to loading the os and then reboot then it will try to restart again but like a car (starts and stops starts and stops) until i get fed up and switch it off at the mains, but if i leave it switched off at the mains then later switch on a boot it seem ...
Does a Radeon Work with ALi Socket 7 chipset?
SnowHawk
DOES IT?? I need to know immediately. . Does the radeon work with a Asus P5A ???.
Win2K didn't install on SCSI drive :(
Dilys
PIII-600, MSI-6163Pro, 256MB RAM, SCSI Tekram 390-U2W, SCSI HDD Seageate 17,8GB, ASUS V7700 Delux, CD-ROM ASUS 50x. Try to install Win2K, but system hag while Setup starting, after detecting hardware.
Has anyone gotten ati tv wonder to work in windows 2k
kiljoy
Has anyone gotten ati tv wonder to work in windows 2k. have tried whats mentioned under hardware using dtv i can get sound but no video but it isnt saying its not seeing a video stream is it possible to get it to work bp6 with 466 celerons, 512 pc100 cas2, geforce gts 2 pro, aureal super quad.
Need Spanned Disk advice Please! Or I will lose 90Gig of in
Topshelf
I have a Win2k Pro machine which has 3 Maxtor HDD's setup as 1 spanned volume. It's 2 40Gig and 1 60Gig. I just added the 60Gig and ever since I've had nothing but problems. I'm at the point now where I believe the OS is pretty much trashed.
A little strange sound in Win2000
Chewie
Hi everyone, First I want to precise that I'm french so I hope you'll excuse me if my English isn't perfect. So,after I've moved from win98se to win2000 pro everyhing 's running fine,all my applications,my games,.
USB DSL Modem and Linksys Router??
Ronin
I'm going to be getting Bellsouth DSL and they are shipping me a USB modem. Can I use a linksys router so the other computers on my Lan will be able to go online or is there another way to hook them all up so they can use the DSL line? Thanks,.
resizing partitions......... possible??? read please.......
Tr0LL
I have a computer that is dual booting Windows ME and Windows 2000. . . . . . . . C: drive is windows ME (fat32) D: drive is Windows 2k (NTFS) E: drive is just an neutral drive (fat32) at first I was planning on using ME most of the time so i made that partition the biggest.
win2k reporting WRONG HDD size
ancker
OK i have a rather large machine. . . (I saved my pennies) you can check out the set-up here www. ancker. net/custombox. html What my problem is, is that Windows 2000 reports my 30GB Western Digital drive to be 7.
Lost Data - PLEASE help!
Ekstreme
Over the last week or so I've been seeing an error I've not come across before. Below is the event viewer account: Source: FTDISK Event ID: 50 {Lost Delayed-Write Data} The system was attempting to transfer file data from buffers to \Device\HarddiskVolume1.