Windows Hardware
MikeZ
For some reason, nothing I do seems to work. I try the add/remove program in the control panel, and it shows that it is removing the latest Catalyst 3 control panel and I need to reboot. But when I reboot, it is still there! I tried deleting files and editing the registry, but nothing seems to work.
Radeon 9700 Pro and LCD monitors
sapiens74
If running Resolutions at higher refresh rates degrades performance, then will running the 9700 pro at 60HZ on a LCD run faster?
Dell PowerEdge 1600SC and Registered DDR
sapiens74
I just ordered a PowerEdge 1600SC from Dell It comes with 128MB ram and I need to order an extra 512MB ECC Registered Ram. Who should I order from? I was looking at Crucial. THey have a good deal on 512MB I need it for Stability and I'm going to test.
Hard Drive Question
ThC 129
I have a WD 80 gb drive, not the nice ones with the 8mb cache, just the regular old 80gb ATA 100 drive. Now this drive is about a year and a half maybe 2 years old. Now when the drive spins up, i get a kinda high pitched whirring sound.
CPU Usage Will not drop below 20% at Idle
CyberGenX
Just built a 1. 7GHz Celeron, 256MB PC2100, Intel 845 MB, Sound Blaster 128, Intel Nic, GeForce 2 GTS. Loaded FRESH INSTALL of Win2K and all Packs and Patches. Only have Norton 7. 51 running, no others programs or driver helpers.
Something strange my 20gig disk turns into a 7gig???????????
Tomay
;( I have a WDC WD205BA 20gig hdd on a QDI BrillianX IS/2000. When I autodetect the hdd it detects it correctly TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE USER 20523 2495 255 0 39769 63 LBA But the nex time I boot even if I press ctrl+alt+del the disk turns into a 7927MB drive, or at least the bios reports it as ...
XP and Epson Stylus Photo 950 problem
Tulensrma
I have a problem with my Epson Stylus Photo 950 printer and Epson has not been able to solve it. According to them it only occurs with some Windows XP / Epson 950 combinations and cannot be fixed by a driver update.
Removing SCSI disk wreaks havoc on dual boot system :(
Ron_Jeremy
The scenario: Win2K on a single SCSI disk (ID#0). I added a 2nd disk (ID#3), installed Redhat 8 on it & used the system in a dual boot configuration without any problem. If I physically remove the disk with Redhat on it, my system does not boot into Windows.
Microsoft Sidewinder 3d Pro works under Windows XP
Lukas
Hi all, just to notice that microsoft's sidewinder 3d pro works under xp. Instructions: 1) Plug it into the joystick port 2) Control Panel > Game Peripherals 3) Add > Microsoft Sidewinder (Autodetect) 4) Configure buttons 5) ENJOY! If you have any questions mail me: lukas@edengames.
Ati RAGE Mobility M-1 AGP and D3d/openGL
DnD_Master
I can't get my Graphics chip to work with an openGL/Direct3D game, Homeworld. Are there third party drivers for the chip that are openGL compatable?.
Monitor problems
Guardian
Hi guys: just bought an IBM P96 19 monitor capable of 1600x1200@85 hz. . . but i can't go beyond 1280x1024@60 hz the drivers from IBM don't help at all Win XP insist in limit me at 1280. . . . . Any clue how fix the problem? Is there any manner to customize the monitor settings? thanks in advance.
Sidewinder Game Pad Pro: Pad Programming Question
hordeprime
I am looking for advice on the Game Pad Pro. Microsoft is impossible to get help from, so this looked like a good forum to try. Many of my games use the Up, Down, Left, & Right cursor buttons to control the character.
KT3 Ultra2 + 350w ps = still no boot up
jeff*
Well, here's the current system I'm trying to get going. MSI KT3 Ultra2 athlonxp 2100 w/ a volcano7 geforce 2mx 256mb ddr333 60gb maxtor 7200 32x lg cd I previously had a (generic) 300w. . Well, that was enough to run at 2100+ with random reboots on heavy loads.
New CPU = random lockups
Avalanche
Hi all. I just upgraded my CPU to the highest spec my mobo can officially take, an AthlonXP 1800+. Surprisingly it runs close to 10 degrees cooler than my old 1. 2Ghz chip, so I know for a fact it's not overheating.
Bug with rendering =(
Human_Chaos|TC|
well, sorry about my english. I have a XP T-bred 1800+, ABIT KR7A-133R, 256MB DDR SAMSUNG PC2700, XFX GF4 Ti4200 64MB DDR rev 1. 2 (dvi, blue). I have formatted this pc with my new CPU (t-bred) in place of the old palomino, installed Via 4in1 hyperion 4.
Best 2D - yes, 2D - graphics card
Rogue Jedi X
The topic kinda says it all. My friend is looking for a good 2D graphics card, since he uses those Photoshop-like programs so much. He's currently using a GeForce card (don't ask which, he never told me) and he's about to hurl it out the window :x Any suggestions?.
NT 4.0 Compatible DVD recorders
TechniQz
Is there any DVD-Burner that is compatible Whit NT 4. 0 The Most Manufactuer Iv Looked Up Doesnt Support DVD - Burners For NT 4. 0.
Optical mouse light stays on
TheSam
Hi everyone I have an ABIT SR7-8X motherboard and a Logitech Wheel Mouse Optical with a PS/2 adapter. When I turn off the computer I find that the mouse light is still on and the mouse is active. I could turn this off with a jumper on my other computer but there doesn't seem to be one on this.
Possible Hard Disk Faliure HELP!!
Curley_Boy
I think one of my HDDs is on the blink About a week ago I heard one of them 'clicking' repetitivly so I powered down the PC for a bit and when I booted it again all seemed well. . . However this morning when I turned on the machine I got the 'Boot Device Faliure' message (or something very simlar you know the one i ...