The Windows XP drivers work, but you have to follow these steps after you downloaded the software:

1) Disconnect the camera from the computer.

2) Extract the executable that you download from Logitech using WinZip or another compression utility. Make sure it retains the directory structure.

3) In the directory structure there are three folders. QCDriver, QCDriver2 and QCDriver3. In each of these folders is a SETUP.EXE. Right click on the SETUP.EXE in each folder, and change its compatibility properties to "Windows XP".

4) Start SETUP.EXE from the ROOT FOLDER of the extracted directory (not from one of the QCDriver folders) and follow the instructions. ---REMEMBER NOT TO HAVE THE CAMERA CONNECTED!!! ---

5) Reboot after it is done. The Camera Connection Wizard will come up after logging in. Connect the camera to the USB port when the program tells you to. Drivers will now be installed automatically.

6) All Done! Happy webcamming!

If for some reason during step 5 it asks you for a folder, browse to the QCDRiver (or 2, or 3) folder.

-

-

-

-

-