Date: 2026-03-02 17:18 | Last update:

Windows Hardware

A forum for discussions of Windows hardware and driver problems

Slack Space 1613 Legacy OS 455 Windows Hardware 9627 Windows Software 5498 Windows Games 5469 Windows Networking 2246 Customization Tweaking 1790 Feedback 1316 Everything New Technology 1823 Windows Security 292

Avatar

Refresh Rate with Voodoo 3 3000 AGP

Corinthian
After a fresh install of Windows 2000 Pro, my monitor is locked at 60 hz when I play games (in 1024x768). I used to have 85 hz. I use the 1. 01. 03 beta driver. Any ideas ?.
5 964
avatar Last reply by Corinthian,
Avatar

Generic volume preventing standby

adrianhall
Whenever I try to go into standby mode, I get an error saying the generic volume is preventing standby, update drivers. . . . . . . . . All I've been trying to achieve is to get my hard disks to spin down after x amount of time.
0 1549
avatar Last reply by adrianhall,
Avatar

Windows NT 4.0 Server

jdulmage
When i'm in the installation of Windows NT 4. 0 Server, after awhile, the program says Setup cannot determine a hard disk in which to setup windows nt. in the MS-DOS part of the setup, you were supposed to select a hard disk to install to or something like that, well, i doesn't even ask you where you want to install.
11 1311
avatar Last reply by wind,
Avatar

FCPGA Core

SuperG
I have a couple questions on the core of my fcpga Celemine 600. . . (at 900+ for a week now) The flip chip design I have heard cannot be lapped. . . . is this true? and I have the golden orb cooler. .
0 696
avatar Last reply by SuperG,
Avatar

Enable Celeron 2 Cache?

SuperG
The Cache on the Celemine is 128k, the other 128 is obviously disabled, or it would be way close to a p3. . . is there any way to enable that? I know it's on the chip just disabled. There HAS to be a way.
2 1439
avatar Last reply by SuperG,
Avatar

Dazzle problems

unknown
I've been attempting to get my usb Dazzle to work in win2k for awhile now- the software doesn't like win2k. Any Ideas guys? There doesn't seem to be any new updates for the drivers at the website. .
0 758
avatar Last reply by unknown,
Avatar

trouble with SP1

UnholyJohnny
just installed service pack 1 and now i notice that win2k won't read my other drive. my system is NTFS and the other drive is fat32 (Maxtor 92041U4). it read it fine before. . . arghhh. anyway i'm a bit of a dullard so can anyone explain this, or if you're kind enough, solve my problem.
1 773
avatar Last reply by JediBaron,
Avatar

Amptron 3100B and SMART compatibility

Anonymous
All my hard drives support it, and I am 98% sure my mobo does too. On the boot screen it says that SMART capability is disabled. Well, I've checked all the documentation on my mboard and have not found a way to enable it.
1 827
avatar Last reply by DrSchmoe,
Avatar

ASUS P2B... Soundblaster PCI 128 don't work

gluev
I 'm looking for somebody who managed to make pci 128 on asus P2b in windows 2000. I have some sound problem, and i don't manage to change the IRQ of this card (actually on IRQ 9 like my SCSI card, like my graphic card etc.
0 678
avatar Last reply by gluev,
Avatar

DirectDraw apps slower in Windows 2000?

someone_nt
I've been using Snes9x,among other windows based emulators (WGens, Dgen, System 16 emulator directx ver. . . . ) (with free roms, not illegal ones 🙂 ), and I've found out they perform awfully in windows 2000.
0 632
avatar Last reply by someone_nt,
Avatar

Internet Keyboard Pro problem

Herring
Works fine mostly, but when running Quake 3, when I hold multiple buttons down, it 'sticks' so I keep running in the same direction. Hitting esc halts it. I've gotten the newest drivers. Any ideas? Cheers.
3 934
avatar Last reply by Herring,
Avatar

HP720c

SunnyLad81
Hi, does anybody has an HP720c that work under Win2k? With photoprint (PhotoRETII)? Thx!
1 1597
avatar Last reply by deliveryman,
Avatar

Windows 2000 & Voodoo Banshee

abs007
I just installed the new voodoo banshee beta drivers and they have totally messed everything up. Every time I boot up the screen is a totally garbled display and it crashes every time. I have removed the drivers and installed the normal ones again, but it is still garbled.
3 1040
avatar Last reply by Uncut_Diamond,
Avatar

ACPI -- good or bad??

Ryo-Ohki
Although this question has probably been asked, I'm curious about the pros/cons of ACPI. I've heard both good and bad from my friends, but I'm curious to hear what you all think. I turned it off the other day, and 2k went nuts redetecting all my hardware and stuff.
12 1925
avatar Last reply by Uncut_Diamond,
Avatar

Windows 2000 motherboard compatibility

jwaldon
I have seven Dual and Quad Processor systems. After the install process of Windows 2000 Standard Server, when you are told to reboot, the system hangs. I have determined that if you remove the second processor and install it works ok.
1 1095
avatar Last reply by Uncut_Diamond,
Avatar

celemine 600's on abit bp6

SuperG
I am building a new computer and am looking for some advice. I am getting an abit bp6 and 2 celemine 600's. I know that the abit board does not support fcpga due to the voltage problems. SOOOO I am getting the neo-s370.
8 2552
avatar Last reply by Uncut_Diamond,
Avatar

SBlive! new drivers Win2k: Winamp problem

radx
After i upgraded to the latest liveware 3 that was just released, i've gotten all these weird sound problems with winamp 2. 61 and 2. 64. So i dont think it's winamps fault. What can i do? Any ideas what is at stake here? Are there workarounds? Diablo 2 have now finally fully functional 3d-audio enhancment but and ...
2 2010
avatar Last reply by Zoli,
Avatar

AC-3 Passthrou with SB Live! in W2K

sailmoon
I've wrote to Creative Labs about the unsupport of AC-3 pass in LW3 for W2K. They answer me that AC-3 will support in the next release of LW, the Live!Ware 4 for Win2K. They think that LW4 will available from september/october.
3 752
avatar Last reply by SHS,