Date: 2026-04-29 22:02 | Last update:

Windows Hardware

A forum for discussions of Windows hardware and driver problems

Slack Space 1613 Legacy OS 455 Windows Hardware 9627 Windows Software 5498 Windows Games 5469 Windows Networking 2246 Customization Tweaking 1790 Feedback 1316 Everything New Technology 1823 Windows Security 292

Avatar

Win2k, BP6 and TNT2 combo problems

T-Bruno
Hi everyone. I've read almost every post and have gotten lots of good info from this board. But now I've got a problem that I'd like some opinions on. Here are my system specs. Win2k Pro Final 128 mb micron ram BP6 with latest non beta bios dual celeron 400 o/c to 500 Diamond TNT2 w/v3.
5 958
avatar Last reply by Da_G,
Avatar

Which cd r/w to get?

A-guy
Hey I got about 200 bucks to spend and want to buy a cd r/w. Im gunna get it from pricewatch cuz prices are so low but I want to make sure that the brand I get is good. Not some p. o. s that im stuck with that doesnt work so good.
9 793
avatar Last reply by HipsterDoofus,
Avatar

Kodak DVC323 on Win2k

osirus
ok does anyone know how to get this thing working? i dont have the cd that came with it and i was looking on the net for the original software but i cant find it. the only thing avaiable at kodaks website is the update.
1 1834
avatar Last reply by Julius X,
Avatar

Overclocking geforce ddr. How far?

Arin
I have the winfast geforce ddr. i over clocked it with coolbits to 135/335. now my question is, is that little dinky fan ok for it. what is to high resulting in it being to hot? What would be the max recomended overclocking speed? also my athalon 500 is apparently running around 110 with a heatsink and 2 fans on it.
5 684
avatar Last reply by Arin,
Avatar

Can someone help me with this error

Mark W
I get this error in the event log upon every reboot. Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7026 Date: 4/6/2000 Time: 10:06:13 PM User: N/A Computer: MW1 Description: The following boot-start or system-start driver(s) failed to load: mpegport vpfilter Does anyone know ...
3 2021
avatar Last reply by Mark W,
Avatar

Sandisk Imagemate Smartmedia USB

Jason Karol
Well, looks like the Imagemate Smartmedia USB reader from Sandisk is a no go for the time being under W2000. I bought one yesterday, brought it home, connected it, and found out there are no drivers built into W2000 for it.
4 5636
avatar Last reply by Zalini,
Avatar

keyboard driver prevents hibernating?!

raider
I enabled succesfully the Hibernate support (control panel, power options), but if I want to Hibernate (or use Stand by) I get every time the following error: The weird thing is that the standard driver (!) prevents the hibernating.
10 3358
avatar Last reply by Mark W,
Avatar

W2k shutdown doesn't power down

ags
I have an ATX motherboard and case. Under Win 98 and NT4 the machine would shutdown correctly - Win98 would power down and NT4 would allow the front panel power switch to power off. Win2000 leaves a message that you may turn off your computer but the front panel switch is disabled.
23 2339
avatar Last reply by Dragon-Lord,
Avatar

Turning off hard disk

Spastic Computer Guru
Is anyone else exp this, when I set 2K to shut down my hardrive after a certain amount of time, they never shut off, and the computer will not come back up. I am forced to do manual restart when I do I rcv a different error every time, restart again, and everything works fine.
10 1676
avatar Last reply by Dragon-Lord,
Avatar

What kind of crap is Creative releasing???

evil Homer
Right, after reading in this forum, and in the Creative SB Live newsgroup, I went back to DXDiag and checked my Directsound settings. After running through the test, it reported that everything was fine with the software buffer, and it THEN tells me that my card doesn't support hardware buffer??? WTF??? What kind o ...
13 1490
avatar Last reply by Dragon-Lord,
Avatar

I got nVidia 5.13 working w/ GeForce DDR...

tony1c
I solved most of the terrible problems I had with the nvidia 5. 13 drivers by setting my FSB speed to 90Mhz (from 100Mhz). I think I'm buying into the theory that the new drivers just enable too many features on the chip and are overloading it somehow.
1 1638
avatar Last reply by ledzeppel,
Avatar

USB and Win2k on Tyan Board

DoseBier
Help! Does someone know where i can get Drivers for my Tyan Tiger 100 Dual Board to get the USB port running??? I´s really important!!
0 810
avatar Last reply by DoseBier,
Avatar

Eicon ISDN Diva USB. Porblems with SMB

simonroockley
When I use my ISDN TA with both processors enabled under Windows 2000 I get the irql_less than or equal to error. Under a uniprocessor system everything works fine. Does any one know a way of getting the TA to work on a SMB system.
0 902
avatar Last reply by simonroockley,
Avatar

Selllin Hardware Here.

Arin
I am selling the following hardware. Email me at freekietah@ezonline. com Msg on aim at W a r e z Drez. <- remove those spaces in the first word of my name. Here is what I am selling. 8mb 2d/3d s3 virge velocity video card.
3 540
avatar Last reply by EddiE314,
Avatar

Sticky Keys Solution!

spacey
Someone told me that if you goto Control Panel Accessibility Options Sticky Keys Settings and uncheck all those options it helps! I'm trying it out. . . .
3 2314
avatar Last reply by mr_yellow,
Avatar

Easy Cd Creator 4.02 and Yamaha 6x burner

Ronin
I installed Easy cd creator 4. 0 and patched it to 4. 02 and the program starts but when I try to burn a cd it tells me that it can't find any CD-R drives, but the drive is there and working ok. Please help.
9 1688
avatar Last reply by Ryo-Ohki,
Avatar

Compaq IJ200 Printer Driver for Win2k?

SaiyanJB
I've been looking for drivers for the Compaq IJ200 Printer for windows 2000 but can't find any. Anyone have any ideas, or a hack to make win9x drivers work on 2000. Thanks for any help. .
0 2302
avatar Last reply by SaiyanJB,