Date: 2026-04-29 12:47 | Last update:

Windows Hardware

A forum for discussions of Windows hardware and driver problems

Slack Space 1613 Legacy OS 455 Windows Hardware 9627 Windows Software 5498 Windows Games 5469 Windows Networking 2246 Customization Tweaking 1790 Feedback 1316 Everything New Technology 1823 Windows Security 292

Avatar

new fasttrak bios, drivers, utility

mathew2
what can i say. . . before i couldnt install win2k AT ALL, i tried all workarounds out there, spent ages searching newgroups, messageboards, testing everything. . new bios, new drivers, new chapter. .
2 1329
avatar Last reply by mathew2,
Avatar

ASUS P3V4X, anyone using this w/WIN2K

Unrealistic
I want to get this motherboard: Quote:ASUS P3V4X Pentium III 133Mhz/Ultra33 MotherboardAsus' new Pentium III motherboard features the VIA Apollo Pro chipset for 133Mhz processor support, 4X AGP, and Ultra66.
2 2639
avatar Last reply by J_Pro,
Avatar

The Tv out on my video card...

sup_yo
ok, I installed win 2k everything works fine. . but I can't get my tv out to work I have a ATI 3D Rage PRO - I can't get it to work with my tv. . it worked fine with win 9x but how do I set it up with win 2k.
0 865
avatar Last reply by sup_yo,
Avatar

USB won't install

sab3864
Under windows 2000 device manager it lists my universal serial bus controllers as an Intel 82371AB/EB PCI to USB Universal Bus Controller, but says: Your computer's system firmware does not include enough information to properly configure and use this device.
2 1097
avatar Last reply by sab3864,
Avatar

Intel PRO (CS430) USB Cam vs NON-PRO USB (CS330) Cam

shawkins
It is important to note the difference between these two cameras. The twain drivers that drewsky hacked out are for the NON-PRO camera (although, they MAY work for the PRO as well - there are no drivers for the PRO version yet - I'm trying to hack some out right now).
0 7059
avatar Last reply by shawkins,
Avatar

Microsoft Natural Pro keyboard

Reidyn
Who actually owns one of these? I see from the specifications that the keyboard has a two-port USB hub, and also has connectors at the end of the cable for USB and PS/2. Can the USB plug actually function as the sole means of getting the keyboard to communicate with the computer (that is, without using the PS/2 plu ...
5 2142
avatar Last reply by Turbo Grunkamoj,
Avatar

sidewinder dual strike

mmaxx
Hello everybody How can i install the sidewinder dual strike software 4. 0 on win2000. It says i don´t have administrator rights. I have already. What must i do ? Please help. Ciao,.
3 1000
avatar Last reply by jazTec,
Avatar

Big problem, i've tried everything!

[CaF]Viper
Okay i have this problem that yesterday i upgraded to the latest detonator 5. 14 driver and i installed it and after reboot my comp would crash so i fixed it and tried 5. 13 and it didn't work then i went back to 3.
3 1024
avatar Last reply by Dragon-Lord,
Avatar

Win2k Setup blue screen

The_Dude
Shortly after the part when the monitor flashes, I get a blue screen in the setup. I've tried everything, taken out all the cards, different ram, different video cards. I just can't figure it out, the only thing I have on my mind that could be causing this is EZ-Bios, I have this on because my bios only reads up to ...
1 794
avatar Last reply by HarU,
Avatar

Problems with my win2k inst. on BP6

Burning_Ice
I've got a serious problem with my new BP6. Win2k pro. installation bluescreens when detecting devices. The error message is different every time, from SCSI. SYS and PCI. SYS error to ntoskrnl. exe saying IRQ_NOT_LESS_OR EQUAL.
7 1197
avatar Last reply by HarU,
Avatar

Finally got my Live! working properly

mote
Well, I've spent weeks scouring this board and various sites, as well as constant e-mails to (and from) Creative Labs tech support. However, for some unknown reason I could not get any sound from my rear speakers.
1 803
avatar Last reply by HarU,
Avatar

Plextor 8/4/32 CD-RW and DMA

tourettes
I noticed that my Plextor doesn't use DMA-mode any more. I have enabled DMA from secondary IDE channel properties. It worked some time ago, but now it suddenly stopped. Any one got any ideas? I'm not sure if this happened after or before I upgraded Plextor's firmware to 1.
4 1614
avatar Last reply by tourettes,
Avatar

UDMA in Win2k not working: VIA MVP3

larojas
I have a A-Trend 5220 motherboard with VIA's MVP3 chipset. UDMA mode refuses to activate for the primary IDE channel in Windows 2000 Pro. Worked fine under WinNT & 98. Errors are reported in Event Viewer (ID's 5 & 11).
0 525
avatar Last reply by larojas,
Avatar

CD-Writer problems

DMN
Ok. . two problems here. . first. . i have an old Memorex crw-1622. . . ive tried different burning software packeges but it all has the same problem, which is: The program will freeze at random times untill i open the cd drive bay.
0 1302
avatar Last reply by DMN,
Avatar

Havent seen this one before

Sixty
Alright, for once this is a CD-RW question that doesn't have anything to do with burning CD's. My drive has worked fine for months now, but I decided to uninstall eazy cd creator 3. 5 to install 4. 0.
8 1087
avatar Last reply by euankirkhope,
Avatar

SCSI or Fasttrak66

slkh
Seems like I am having a problem with Fasttrak66. I have an onboard SCSI and a Fasttrak66 IDERAID card. It does not have the Fasttrak66 BIOS bootup screen at all when I enable onboard SCSI. But the Fasttrak66 BIOS screen does appear if I disable SCSI onboard.
8 1516
avatar Last reply by slkh,